by Tommy N. Updated Apr 24, 2026
The IP address 192.168.1.245 is a private network address commonly used as the default management IP for Hikvision IP cameras, Dahua NVRs, and other network surveillance equipment. If you have a security camera system installed in your home or business, there is a good chance your cameras or network video recorder (NVR) is accessible at this address. Logging in allows you to view live feeds, adjust camera settings, configure recording schedules, and manage motion detection alerts.
LOGIN TO 192.168.1.245 ADMIN PANEL
If 192.168.1.245 does not work, your camera or NVR might use 192.168.1.64 (common Hikvision default), 192.168.1.108, or 192.168.0.64. You can use the Hikvision SADP Tool or Dahua ConfigTool to discover devices on your network. Also check your router's DHCP client list for connected camera devices.
Below are the most common default username and password combinations for security cameras and NVRs at 192.168.1.245:
| Username | Password | Device / Brand |
|---|---|---|
| admin | admin | Hikvision (older firmware) |
| admin | 12345 | Hikvision / Dahua (legacy) |
| admin | (device serial number) | Hikvision (newer firmware) |
| admin | password | Generic IP Cameras |
| admin | (set during activation) | Hikvision / Dahua (current models) |
| 888888 | 888888 | Dahua NVRs (local access) |
Follow these four steps to access your security camera or NVR admin panel at 192.168.1.245:
http://192.168.1.245 in your browser's address bar and press Enter. Hikvision and Dahua devices work best with Internet Explorer or Microsoft Edge in IE compatibility mode. You may need to install an ActiveX plugin or download the web components package for live video viewing.If the login page does not appear, ensure your computer is on the 192.168.1.x subnet. Some IP cameras require a specific browser plugin — try using Internet Explorer or install the Hikvision web components from their website. If your camera was assigned a different IP via DHCP, use the Hikvision SADP Tool (free download) or Dahua ConfigTool to scan your network and find the actual IP address. Also check that port 80 is not blocked by your firewall.
Once inside the 192.168.1.245 admin panel, you have full control over your security camera or NVR settings.
Configure network parameters including IP address, subnet mask, gateway, and DNS. If your camera supports WiFi, you can set up wireless connectivity. For your broader home network, you can change your WiFi name on your router and create a separate guest network to isolate IoT devices like cameras from your main network for better security.
Security is critical for network cameras. Change the default admin password immediately — unsecured cameras are a common target for hackers. Enable HTTPS for encrypted management access. Use MAC address filtering on your router to control which devices can access your network, and block unauthorized users from connecting.
Configure motion detection zones, recording schedules, and alarm triggers. Set up port forwarding on your router to access camera feeds remotely from outside your home network. Configure DDNS so you can access your cameras using a memorable hostname instead of your ISP's dynamic IP. For enhanced privacy, consider setting up a VPN on your router instead of port forwarding.
Keep your cameras secure by regularly applying firmware updates. Update firmware on both your cameras and router to patch known vulnerabilities. If a camera malfunctions, perform a factory reset using the reset button on the device. Use your router to check all connected devices and ensure no unauthorized devices are accessing your camera network.
Ensure you type the IP address correctly. Here are common mistakes users make when trying to access 192.168.1.245:
| Common Typo | Correct Address |
|---|---|
| 192.168.1.254 (swapped digits) | 192.168.1.245 |
| 192.168.1.24 (missing 5) | 192.168.1.245 |
| 192.168.1245 | 192.168.1.245 |
| 192.168.l.245 (letter L) | 192.168.1.245 |
| http//192.168.1.245 | http://192.168.1.245 |
| 192.168.1.245.com | 192.168.1.245 |
| www.192.168.1.245 | 192.168.1.245 |
| 192.168.12.45 | 192.168.1.245 |
Hikvision and Dahua are the two largest manufacturers of video surveillance equipment globally. Hikvision, headquartered in Hangzhou, China, holds the largest market share in the surveillance industry, with cameras and NVRs deployed in homes, businesses, and government installations worldwide. Dahua Technology, also based in China, is the second-largest manufacturer and offers a comparable range of IP cameras, NVRs, and video management solutions.
Modern Hikvision cameras (DS-2CD series and newer) require an activation process on first boot — you must create a strong admin password before the device can be used. This security measure was introduced to combat the widespread problem of cameras left on default credentials being exploited by botnets and unauthorized viewers. The SADP (Search Active Devices Protocol) tool from Hikvision is the recommended way to discover and activate cameras on your network.
Dahua devices use a similar approach with their ConfigTool software for device discovery and initialization. Both brands support ONVIF protocol for interoperability with third-party NVRs and video management systems. When accessing these cameras at 192.168.1.245, you may need to install browser plugins for live video streaming, though newer models increasingly support HTML5 video playback without plugins.
The address 192.168.1.245 is a private IPv4 address belonging to the 192.168.0.0/16 range reserved by RFC 1918 for private network use. This address cannot be routed on the public internet and is only used for communication within local networks. It is near the upper end of the 192.168.1.x subnet, which means it is less likely to conflict with common gateway addresses (like .1 or .254) or early DHCP assignments.
Surveillance equipment manufacturers often choose higher addresses in the subnet (like .245, .108, or .64) as factory defaults precisely to avoid conflicts with routers and other networking equipment that typically use .1 or .254. This makes it easier to add cameras to an existing network without immediate IP conflicts.
Understanding your private IP address scheme is important for security camera installations. Each camera needs a unique IP address on your network, and using static addresses outside your DHCP range ensures cameras maintain consistent connectivity. Your router's NAT firewall keeps these private addresses hidden from the internet, providing a baseline layer of protection for your cameras.
| IP Address | Common Brands | Typical Use |
|---|---|---|
| 192.168.1.245 | Hikvision, Dahua | IP cameras and NVRs |
| 10.0.0.1 | Xfinity, AT&T | ISP gateway routers |
| 192.168.0.1 | D-Link, Netgear, TP-Link | Home router default |
| 192.168.1.1 | Linksys, ASUS, Cisco | Most common router default |
| 192.168.1.254 | Thomson, BT Hub | UK ISP routers |
Watch this video guide on accessing your router or network device admin panel:
Pro Tip: Never expose your Hikvision or Dahua cameras directly to the internet via port forwarding without changing the default credentials and updating firmware first. Instead, use a VPN to access your home network remotely, then view cameras through their local IP addresses. This is far more secure than opening ports 80, 443, or 8000 on your router, which exposes cameras to brute-force attacks and known exploits.
192.168.1.245 is a private IP address commonly used as the default management interface for Hikvision IP cameras, Dahua NVRs, and other network surveillance equipment. It allows you to access live video feeds, configure recording settings, and manage camera parameters through a web browser.
For older Hikvision cameras, the default is admin/12345 or admin/admin. Newer models require you to create a password during the activation process. Dahua devices may use admin/admin or 888888/888888 for local access. Always check your device documentation for specific credentials.
Most Hikvision and Dahua cameras require a browser plugin (ActiveX or web components) for live video streaming. Use Internet Explorer or Edge in IE mode, and install the plugin when prompted. Some newer models support HTML5 video in Chrome and Firefox without plugins.
Download the Hikvision SADP Tool or Dahua ConfigTool from the manufacturer's website. These free utilities scan your local network and list all compatible devices with their current IP addresses, firmware versions, and activation status.
Press and hold the reset button on the camera for 15-30 seconds while the camera is powered on. The reset button location varies by model — check the device manual. After reset, the camera will return to its default IP address and require re-activation with a new password.
No, 192.168.1.245 is a private IP address only accessible on your local network. For remote access, you can set up port forwarding on your router (less secure) or configure a VPN (recommended). Hikvision also offers Hik-Connect cloud service, and Dahua offers DMSS for remote viewing through their apps.
No. Cameras with default passwords are frequently targeted by botnets and hackers. Always change the admin password to something strong, update firmware regularly, disable UPnP on your router, and avoid exposing camera ports directly to the internet. Use a dedicated VLAN or network segment for your cameras when possible.
 |
 |
 |
 |
About Tommy N.
Tommy is the founder of RouterHax and a network engineer with over ten years of experience in home and enterprise networking. He has configured and troubleshot networks ranging from simple home setups to multi-site enterprise deployments, with deep hands-on experience in router configuration, WiFi optimization, and network security. At RouterHax, he oversees editorial direction and covers home networking guides, mesh WiFi system reviews, and practical troubleshooting resources for everyday users.
Search
Popular Tools
Browse Guides
Promotion for FREE Gifts. Moreover, Free Items here. Disable Ad Blocker to get them all.
Once done, hit any button as below
|
|
|
|
