Find the default login page, IP address, username, and password for any router brand. Select or search your router manufacturer below to instantly see the credentials and admin panel URL you need to access your router settings.
Every router ships with a default set of login credentials that lets you access the admin panel for the first time. This typically includes a default IP address (such as 192.168.1.1 or 192.168.0.1), a default username, and a default password. Knowing these defaults is the first step toward configuring your network, changing WiFi passwords, setting up port forwarding, or enabling QoS for better performance.
If you've never logged in to your router before, the credentials above will get you started. If someone has already changed the password, you may need to factory reset your router to restore the defaults.
Follow these steps to access your router's admin panel:
Not sure what your router's IP address is? Use our Find Router IP Address guide or the Subnet Calculator to identify your network's gateway.
ipconfig | findstr "Default Gateway"ip route | grep default
# or
netstat -nr | grep defaultMost home routers use one of a few common IP addresses. Here's a quick reference grouped by default gateway IP:
| Default IP | Common Brands | Typical Username | Typical Password |
|---|---|---|---|
| 192.168.1.1 | Asus, Linksys, Netgear, Cisco, Zyxel | admin | admin / password |
| 192.168.0.1 | TP-Link, D-Link, Tenda, Arris | admin | admin / (blank) |
| 10.0.0.1 | Xfinity (Comcast), some ISP gateways | admin | password |
| 192.168.1.254 | AT&T, BT (UK) | admin | (on label) |
| 192.168.86.1 | Google Nest WiFi | N/A | N/A (app only) |
| 192.168.178.1 | Fritz!Box | (none) | (on label) |
Pro Tip: If the default IP address does not work, your router may have been reconfigured to use a different subnet. Open a command prompt and run
ipconfig(Windows) orip route(Linux/Mac) to find the actual gateway address. You can also try our Port Checker to verify the management port (usually 80 or 443) is reachable.
There are several reasons the default login might fail. Here's a troubleshooting checklist:
| Problem | Likely Cause | Solution |
|---|---|---|
| Page doesn't load | Wrong IP address | Run ipconfig and check the Default Gateway |
| "Connection refused" | HTTPS required | Try https:// instead of http:// |
| "Invalid credentials" | Password was changed | Reset the password or factory reset |
| Login page looks different | ISP custom firmware | Check ISP documentation or default password list |
| Redirects to ISP portal | Managed gateway | Contact ISP or use bridge mode (guide) |
Once you gain access using default credentials, you should immediately take these security steps. Leaving default passwords in place is one of the most common home network vulnerabilities:
Different router brands offer various ways to access the admin panel. Understanding which method your router supports helps if the standard web interface is not available:
| Method | How It Works | Brands That Use It |
|---|---|---|
| Web browser (IP) | Navigate to default IP in browser | Most brands (Asus, Netgear, TP-Link, etc.) |
| Web browser (hostname) | Navigate to brand hostname (e.g., routerlogin.net) | Netgear, TP-Link, Linksys, Fritz!Box |
| Mobile app only | Managed entirely through smartphone app | Eero, Google Nest, TP-Link Deco |
| SSH / Telnet | Command-line access for advanced users | MikroTik, OpenWrt, Ubiquiti |
| Cloud dashboard | Web portal hosted by manufacturer | Ubiquiti UniFi, Meraki, Firewalla |
If you've completely lost access, the most reliable recovery method is a factory reset. This restores all settings to defaults, including the admin credentials. See our detailed router reset guide for step-by-step instructions.
Before resetting, document your current settings if possible. You'll need to reconfigure your WiFi name, password, port forwarding rules, DDNS settings, and any custom DHCP reservations. If you use UPnP, that will also need to be re-enabled after the reset.
For more complex setups involving multiple routers or access point mode, take screenshots of every settings page before performing the reset.
ipconfig or ip route commands to find your actual gateway IP.The most common default router IP address is 192.168.1.1, used by brands like Asus, Linksys, Netgear, and Cisco. The second most common is 192.168.0.1, used by TP-Link, D-Link, and Tenda. ISP-provided gateways like Xfinity often use 10.0.0.1.
Open a command prompt and type ipconfig on Windows or ip route on macOS/Linux. Look for the "Default Gateway" value — that's your router's actual IP address. Enter it in your browser's address bar to reach the login page.
If the default credentials don't work and you've forgotten the custom password, you'll need to perform a factory reset. Press and hold the reset button on your router for 10-15 seconds. This restores default credentials but erases all custom settings. See our forgot router password guide for detailed steps.
No, leaving default credentials in place is a serious security risk. Attackers can easily look up default passwords for any router brand. Always change the admin password and WiFi password after first login.
Yes, you can access most routers by opening a browser on your phone and navigating to the default IP address while connected to the WiFi network. Some brands like Eero, Google Nest, and TP-Link Deco require their dedicated mobile apps instead.
Some ISP-provided gateways redirect to a branded management portal. You may need to use the ISP's app or website for management, or you can put the gateway in bridge mode and connect your own router for full control.
Change your router admin password at least once a year, or immediately if you suspect unauthorized access. Use a strong password with at least 12 characters combining uppercase, lowercase, numbers, and symbols. Our Password Generator can create a secure password for you.
About Tommy N.
Tommy is the founder of RouterHax and a network engineer with 10+ years of experience in home and enterprise networking. He specializes in router configuration, WiFi optimization, and network security. When not writing guides, he's testing the latest mesh WiFi systems and helping readers troubleshoot their home networks.
 |
 |
 |
 |
Promotion for FREE Gifts. Moreover, Free Items here. Disable Ad Blocker to get them all.
Once done, hit any button as below
|
|
|
|